
3D PRINTER COMPARATIVE
STREAM SERIES
STREAM 30 ULTRA SC | STREAM 30 ULTRA | STREAM 20 MK2 | STREAM 30 MK2 | STREAM 20 DUAL MK2 | STREAM 30 DUAL MK2 | |
---|---|---|---|---|---|---|
Multi-materials | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Filament 1.75mm | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Compatibility flexible | ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
Nbre. of Nozzle | ![]() |
![]() |
![]() |
![]() |
![]() ![]() |
![]() ![]() |
Résolution X/Y | ![]() ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() |
![]() ![]() ![]() |
![]() ![]() ![]() |
![]() ![]() ![]() |
Min layer thickness
|
![]() ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
Nozzle Temperature | ![]() ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() |
![]() ![]() ![]() |
![]() ![]() ![]() |
![]() ![]() ![]() |
Nozzle 0.4mm | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Nozzle 0.25mm | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Printing surface
|
![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() |
![]() ![]() ![]() ![]() |
![]() |
![]() ![]() ![]() |
Printing Volume | ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() |
![]() ![]() ![]() ![]() ![]() |
![]() ![]() |
![]() ![]() ![]() ![]() |
Max print speed
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() |
![]() ![]() ![]() |
Alimentation | ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
LCD Screen | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
LED lighting
|
![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() ![]() |
![]() ![]() |
![]() ![]() ![]() |
![]() ![]() |
![]() ![]() ![]() |
Heating tray
|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Max temperature bed | ![]() ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() |
![]() ![]() ![]() |
![]() ![]() ![]() |
![]() ![]() ![]() |
Heating Speed | ![]() ![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() ![]() ![]() |
End of filament detection
|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Semi-automatic calibration
|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Overheating protection
|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
STREAM 30 ULTRA SC | |
---|---|
Multi-materials | ![]() |
Filament 1.75mm | ![]() |
Compatibility flexible | ![]() ![]() ![]() ![]() ![]() |
Nbre. of Nozzle | ![]() |
Résolution X/Y | ![]() ![]() ![]() ![]() ![]() ![]() |
Min layer thickness
|
![]() ![]() ![]() ![]() ![]() ![]() |
Nozzle Temperature | ![]() ![]() ![]() ![]() ![]() ![]() |
Nozzle 0.4mm | ![]() |
Nozzle 0.25mm | ![]() |
Printing surface
|
![]() ![]() ![]() ![]() |
Printing Volume | ![]() ![]() ![]() ![]() ![]() |
Max print speed
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Alimentation | ![]() ![]() ![]() ![]() ![]() |
LCD Screen | ![]() |
LED lighting
|
![]() ![]() ![]() ![]() ![]() |
Heating tray
|
![]() |
Max temperature bed | ![]() ![]() ![]() ![]() ![]() ![]() |
Heating Speed | ![]() ![]() ![]() ![]() ![]() ![]() |
End of filament detection
|
![]() |
Semi-automatic calibration
|
![]() |
Overheating protection
|
![]() |
STREAM 30 ULTRA | |
---|---|
Multi-materials | ![]() |
Filament 1.75mm | ![]() |
Compatibility flexible | ![]() ![]() ![]() ![]() |
Nbre. of Nozzle | ![]() |
Résolution X/Y | ![]() ![]() ![]() ![]() ![]() ![]() |
Min layer thickness
|
![]() ![]() ![]() ![]() ![]() ![]() |
Nozzle Temperature | ![]() ![]() ![]() ![]() ![]() ![]() |
Nozzle 0.4mm | ![]() |
Nozzle 0.25mm | ![]() |
Printing surface
|
![]() ![]() ![]() ![]() |
Printing Volume | ![]() ![]() ![]() ![]() ![]() |
Max print speed
|
![]() ![]() ![]() ![]() ![]() ![]() |
Alimentation | ![]() ![]() ![]() ![]() ![]() |
LCD Screen | ![]() |
LED lighting
|
![]() ![]() ![]() ![]() ![]() |
Heating tray
|
![]() |
Max temperature bed | ![]() ![]() ![]() ![]() ![]() ![]() |
Heating Speed | ![]() ![]() ![]() ![]() ![]() |
End of filament detection
|
![]() |
Semi-automatic calibration
|
![]() |
Overheating protection
|
![]() |
STREAM 20 MK2 | |
---|---|
Multi-materials | ![]() |
Filament 1.75mm | ![]() |
Compatibility flexible | ![]() ![]() ![]() ![]() |
Nbre. of Nozzle | ![]() |
Résolution X/Y | ![]() ![]() ![]() |
Min layer thickness
|
![]() ![]() ![]() ![]() |
Nozzle Temperature | ![]() ![]() ![]() |
Nozzle 0.4mm | ![]() |
Nozzle 0.25mm | ![]() |
Printing surface
|
![]() ![]() |
Printing Volume | ![]() ![]() ![]() |
Max print speed
|
![]() ![]() ![]() ![]() |
Alimentation | ![]() ![]() ![]() ![]() |
LCD Screen | ![]() |
LED lighting
|
![]() ![]() |
Heating tray
|
![]() |
Max temperature bed | ![]() ![]() ![]() |
Heating Speed | ![]() ![]() ![]() ![]() |
End of filament detection
|
![]() |
Semi-automatic calibration
|
![]() |
Overheating protection
|
![]() |
STREAM 30 MK2 | |
---|---|
Multi-materials | ![]() |
Filament 1.75mm | ![]() |
Compatibility flexible | ![]() ![]() ![]() ![]() |
Nbre. of Nozzle | ![]() |
Résolution X/Y | ![]() ![]() ![]() |
Min layer thickness
|
![]() ![]() ![]() ![]() |
Nozzle Temperature | ![]() ![]() ![]() |
Nozzle 0.4mm | ![]() |
Nozzle 0.25mm | ![]() |
Printing surface
|
![]() ![]() ![]() ![]() |
Printing Volume | ![]() ![]() ![]() ![]() ![]() |
Max print speed
|
![]() ![]() ![]() ![]() |
Alimentation | ![]() ![]() ![]() ![]() |
LCD Screen | ![]() |
LED lighting
|
![]() ![]() ![]() |
Heating tray
|
![]() |
Max temperature bed | ![]() ![]() ![]() |
Heating Speed | ![]() ![]() ![]() |
End of filament detection
|
![]() |
Semi-automatic calibration
|
![]() |
Overheating protection
|
![]() |
STREAM 20 DUAL MK2 | |
---|---|
Multi-materials | ![]() |
Filament 1.75mm | ![]() |
Compatibility flexible | ![]() ![]() ![]() ![]() |
Nbre. of Nozzle | ![]() ![]() |
Résolution X/Y | ![]() ![]() ![]() |
Min layer thickness
|
![]() ![]() ![]() ![]() |
Nozzle Temperature | ![]() ![]() ![]() |
Nozzle 0.4mm | ![]() |
Nozzle 0.25mm | ![]() |
Printing surface
|
![]() |
Printing Volume | ![]() ![]() |
Max print speed
|
![]() ![]() ![]() |
Alimentation | ![]() ![]() ![]() ![]() |
LCD Screen | ![]() |
LED lighting
|
![]() ![]() |
Heating tray
|
![]() |
Max temperature bed | ![]() ![]() ![]() |
Heating Speed | ![]() ![]() ![]() ![]() |
End of filament detection
|
![]() |
Semi-automatic calibration
|
![]() |
Overheating protection
|
![]() |
STREAM 30 DUAL MK2 | |
---|---|
Multi-materials | ![]() |
Filament 1.75mm | ![]() |
Compatibility flexible | ![]() ![]() ![]() ![]() |
Nbre. of Nozzle | ![]() ![]() |
Résolution X/Y | ![]() ![]() ![]() |
Min layer thickness
|
![]() ![]() ![]() ![]() |
Nozzle Temperature | ![]() ![]() ![]() |
Nozzle 0.4mm | ![]() |
Nozzle 0.25mm | ![]() |
Printing surface
|
![]() ![]() ![]() |
Printing Volume | ![]() ![]() ![]() ![]() |
Max print speed
|
![]() ![]() ![]() |
Alimentation | ![]() ![]() ![]() ![]() |
LCD Screen | ![]() |
LED lighting
|
![]() ![]() ![]() |
Heating tray
|
![]() |
Max temperature bed | ![]() ![]() ![]() |
Heating Speed | ![]() ![]() ![]() |
End of filament detection
|
![]() |
Semi-automatic calibration
|
![]() |
Overheating protection
|
![]() |
GENERAL SPECIFICATIONS
> Print dimensions up to L300xP200x¬H300mm (A4)
> 1.75mm filament, 1 or 2 nozzles, 300 ° max
> X & Y positioning accuracy of 60 microns
> Z positioning accuracy of 6 microns
> Print resolution from 275μ to 25 micron
> Print speed: from 10 to 120mm / s
> 0.4mm printing nozzle [option 0.25 to 0.80]
> Stainless steel and hardened steel nozzle [Optional]
> Fine filament detection & semi-automatic change
> 3.5 "color LCD touch screen
> SDHC reader for reliable standalone printing
> Integrated 110 / 230V 430w power supply, 80% Bronze + efficiency
> LED interior lighting
> Closure cap for closed chamber [Optional]
> Emergency stop button on the front
> 110 ° stabilized aluminum heating plate
> 6mm aeronautical aluminum chassis, CNC milling
> Closed case and protective front door [lock optional]
> Thermostatic fans for noise reduction
> High quality lined bearings and rectified chromed stainless steel shaft
> Simple multi-function touch menu in French
> Windows driver & pre-configured French software
> Power consumption <9w at rest, <300w in print
> Size 20: L43xH43.5xP46.5cm, 30: L52xH48xP46.5cm
> Weight: 26Kg / 29Kg
> CE conformity
MATERIALS
- PLA / PHA / PLA-N ...
- ABS / ASA / PS / PP
- Soluble HIPS, PVA, Ultra Support
- Flexible TPU, FPE ...
- PETG / Carbon / ESD plastic
- Bronze / Copper / Brass / Stainless steel / Iron ...
- Loaded wood & stones all types
- Carbon / Kevlar / Fiberglass
- Graphite / ESD / Conductive
- Nylons
- Polycarbonate
- Moldlay (lost wax casting)
- All filaments and marks